10. Building a UART transmitter

What you will build. In this last chapter you build a complete, working circuit of the kind found in almost every electronic product: a UART transmitter, which sends text from a chip to a computer over a single wire. You will learn how a character becomes a byte and how a byte is wrapped into a frame that a receiver can find. Then you will design the transmitter with the method of the previous chapter, build it in two steps, check it against a receiver, and read a message off a waveform yourself. Every chapter of this course contributes something to it.

What a UART is

Two chips need to exchange data. The obvious way is a bus of eight wires and a shared clock, but wires and connector pins cost money, and a clock is troublesome to carry over a long cable. A UART does it with one wire in each direction and no shared clock at all. The name stands for universal asynchronous receiver and transmitter, and asynchronous is the important word: it means “without a common clock”.

🔒 Log in or create a free account to read the rest of this chapter

This course is free. An account also lets you run the simulations, try the circuits and keep your place.

Create a free account Log in Back to the course